Kodiak Defence WK180-C receives RCMP FRT – Non-Restricted AR Type Under $1000
Kodiak Defence WK180-C receives RCMP FRT – Non-Restricted AR Type Under $1000
If you have any questions, concerns, or would like to order one of these bad boys now that is has an FRT, As always:
You can E-mail us at: sales@wolverineSupplies.com
You can Call us at: 204-748-2454
You can send at letter to: Box 729 , #1 River Valley Road, Virden, MB, R0M 2C0 , Canada
You can send a messenger to : Lattitude – 49.89617 | Longitude – 100.85384 NE ¼ 5-11-25
Link to the Pre-Order –> https://www.wolverinesupplies.com/…/KODWK180CONLINE_Kodiak-…
Non-Restricted AR Type Under a $1000 Kodiak Defence WK180-C 5.56 Nato 18.6″. Please note, this rifle is not in stock, it is a back order only. Orders will be filled in the order that they are received. Orders can be cancelled at any time with a full refund, less a $50.00 administration fee.
Product Code: KODWK180CONLINE
If you have any questions or concerns, please contact us before placing the order.
The photo shown is of the pre-production model, the actual firearm may not be exactly as shown.
The WK180-C is designed and manufactured in Canada to provide an affordable, reliable, lightweight rifle for recreational shooting. The upper receiver is finished with a 1913 rail to allow the fitting of optics or iron sights, sights not included. She is chambered in .223 Wylde which allows the unhindered use of both .223 Rem and 5.56 NATO. Standard AR15 type magazines are used. The free float railed handguard allows for the attachment of your favourite accessories.
Manufacturer: Kodiak Defense
Calibre: 5.56 NATO / .223 REM
Safety Type: Ambidextrous
Trigger Type: AR 15
Barrel Specifications: 18.7 inch Chrome Moly. Medium Heavy.
Twist Rate: 1:8
Gas System: Short Stroke Gas Piston
Muzzle Device: A2 Flash Hider. 1/2 x 28 tpi
Upper Receiver: Aircraft Grade 6061-T6 Aluminum
Lower Receiver: Aircraft Grade 6061-T6 Aluminum
Handguard: Free Float, 1913 and M-Lok
Sights: Not Included
Finish: Black hard Coat Anodized Class III
Weight: 7.25 lbs
Overall Length: 36.7 inches
Accessories Included: Two 5 Round Magazines
Where can I preorder:
Wolverine Supplies: https://www.wolverinesupplies.com/ProductDetail/KODWK180CONLINE_-Kodiak-Defense-WK180-C-5-56-Nato-18-6–Non-Restricted-Retractable-Stock-Black-
The details of the WK 180-C :
Here at Wolverine Supplies, we are proud to announce the WK180-C non-restricted rifle. This exciting “new” rifle was conceived with the goal of providing a simple, reliable, semi-auto rifle to the Canadian market with a target retail price of $995.00 Canadian dollars. Most people claimed that this would be impossible to achieve but by keeping that goal in mind from the beginning, we are delighted to say we have achieved it, well at least for our first order. Here at Wolverine Supplies we took our ideas to Kodiak Defence and working with their design team the result was the WK180-C that we are introducing to the market today.
This is not a custom rifle, if we offer different options then the price has to go up, which defeats our original goal of keeping it affordable. Remember what Henry Ford said: “You can have any colour you like as long as it is black.”
We have utilized as many standards “off the shelf” components’ as possible in order to achieve our target retail price of $995.00. The WK180-C will provide a good platform for “plinking”, hunting small varmints and informal target shooting. The lightweight and easy controls make it an ideal choice for teaching youngsters firearms safety and basic marksmanship principals. The WK180-C also provides a good basic rifle that owners can easily customize to suit their individual requirements.
Lower receiver: Manufactured in Canada by Kodiak Defence they are CNC machined from Aircraft grade 6061-T6 Aluminium and black hard coat anodized Class III. The WK180-C lower is a direct replacement for the factory AR-180B polymer lower receiver.
Trigger unit: We are using a standard AR15 trigger, sear, hammer assembly, this should allow owners to fit most aftermarket trigger assembles if they choose to. It is too early to guarantee that all aftermarket triggers can be fitted as the WK180-C uses a different safety to the AR-15 due to thicker receiver walls, so some gunsmithing may be required.
Upper receiver: Most people will recognise the similarity to the AR180 B but instead of a stamped tin receiver we are using a new receiver CNC machined by Kodiak Defense from Aircraft grade 6061-T6 Aluminium and black hard coat anodized Class III. The receiver features a 1913 rail on the top to allow the easy mounting of any optics or iron sights. As supplied no optics or iron sights are included. The bolt carrier is a modified design from the original ArmaLite as the gas piston is higher due to the use of a barrel retaining nut. We use the original style of twin captive recoil spring guides which I believe was pioneered in the US WWII M3 “Grease Gun”. This system allows for increased clearances to enhance reliability and also keeps wear to a minimum. The added advantage is that as no operating mechanism extends rearward of the receiver and therefore a side folding stock can be used.
Gas system: Short stroke gas piston utilising a one-piece gas piston and piston cup. We now use a one-piece gas piston similar to the FN FAL and the gas cylinder plug is threaded in like the M14 gas cylinder plug. Our pre-production prototype features a short piston, we are looking at moving to a medium length as I think it presents a more balanced look for production guns.
Barrels: We have utilised standard AR15 type barrels using original AR15 barrel nuts. By using AR15 barrels we have allowed for easier customisation should the owner require to do so. Barrel length is 18.7 inches / 467 mm to ensure non-restricted classification. We have standardised on a medium heavy profile barrel with a 1:8 twist. The combination of barrel length, profile and the lightweight gas system has resulted in a lightweight rifle with good handling characteristics and balance.
Handguard: A simple lightweight free float handguard that clamps around the barrel nut. Features a 1913 rail on the top and M-Lok on the sides and bottom.
Buttstock: Again in order to keep to our target retail price all rifles will be shipped with an AR15 type buffer tube and a retractable buttstock. This, of course, allows for a whole range of aftermarket buttstocks to be used at the owners choice. We will be offering a side folding hinge adapter as an aftermarket option.
Caliber: Initially the rifle will be available in .223 Rem, the chamber will be .223 Wylde allowing the unhindered use of both .223 Rem and 5.56 NATO. In the future, we do plan on producing her in calibre 7.62×39 and yes, of this calibre we would be looking for a chrome lined barrel, that may put the price up. In 5.56 she uses standard AR15 type magazines, two magazines will be included with a rifle, initially, these will be the excellent 5/30 rd Hera mags. Following the original ArmaLite design the bolt will lock to the rear when the last shot is fired but there is no bolt release catch. Recognizing that there is no bolt release catch we have made the reciprocating bolt handle reversible to suit either left or right handed shooters. A bolt release catch may be added in the future, no guarantee at this time that it will be in the first production run.
Warranty: All WK180-C rifles will carry a full one year warranty against defective material and workmanship. All warranty will be carried out by Kodiak Defence.
Many of you will be asking: “Where is the FRT?” the answer is simple, the FRT is pending. As the FRT is not a legal or mandatory requirement the responsibility of ensuring the rifle “is legal” rest with us, the manufacturer. The WK180-C rifle receiver is a copy of the non-restricted AR180-B, this receiver is already approved as produced by at least two other manufacturers. On the WK180-C the barrel is 18.7 inches long, the overall length is within prescribed limits and she is shipped with two 5 rd mags. Therefore she meets all the current requirements for a non – restricted firearm. When a firearm is manufactured outside of Canada the importer is required to obtain an International Import Certificate and the Government policy is not to issue an IIC without first having an FRT. We were told this was a legal requirement, when in fact it is not, but it is Government policy.
It is not a fluke that the AR180-B is non restricted. We imported the first one from Armalite in 2002 she was declared prohibited by the authorities. I faxed them my presentation as to why that classification was not correct and that she should, in fact, be restricted or non restricted depending on barrel length. My presentation was accepted and the AR180-B was re-classified non- restricted allowing us to import and market the AR180-B for as long as she was in production.
As the WK180-C is manufactured in Canada by Kodiak Defense, there is no legal requirement for us to wait for an FRT before manufacturing and marketing the WK180-C, I have this confirmed in writing from the RCMP SFSS. See the following e-mail:
Good day, John:
With respect to your statement: – “If Wolverine Supplies was to manufacture a semi-auto centerfire rifle in Canada with a 19-inch barrel I assume we could simply go ahead and market her without your inspection as there is no legal requirement to have an FRT”.
- For the purposes of the FRT, I would like to draw a clear distinction between the “manufacturer” who makes all components from “scratch” including the receiver and barrel and is not just an assembler of components with metalworking, metal finishing and woodworking skills, which accurately describes the average “gunsmith”. The former is a “manufacturer”, the latter is not.
- I presume that Wolverine (the business entity) in the hypothetical statement above, and their supply chain have all the required licences and authorities.
Then the answer is YES, BUT the manufacturer assumes full responsibility for assuring accurate classification of the firearm and accessories such as stocks and cartridge magazines.
Be aware that other regulators may require an FRT Record for their purposes.
F.A. William (Bill) Etter Chief Firearms Technologist Specialized Firearms Support Services Firearms Investigative and Enforcement Services Directorate RCMP-CFP Specialized Policing Services
If you choose to wait for an FRT before ordering please feel free to do so. If anyone has any concerns or questions, John can be reached at John@wolverinesupplies.com
About KODIAK DEFENCE INC :
Kodiak Defence is a Canadian based, weapons manufacturer and logistics Company. Kodiak Defence develops and manufactures special to task weapon platforms, including Carbines, Assault rifles, light and heavy machine guns, pistols and sniper weapon systems, we also have the capability to procure and deliver all the operational support equipment and ammunition to the client at reduced timelines in comparison to other contenders in this market.
IF YOU WOULD LIKE TO PURCHASE THIS RIFLE PLEASE GO TO OUR EXCLUSIVE DISTRIBUTOR OR PRESS HERE.
If you have additional questions please contact our EXCLUSIVE DISTRIBUTOR for this rifle Wolverine Supplies.
FOR INTERNATIONAL SALES INQUIRIES PLEASE E-MAIL: firstname.lastname@example.org
MANY OF YOU ASKING THIS QUESTIONS.
CURRENTLY, WE WILL NOT SELL PARTS FOR THIS RIFLE.
WE WILL NOT MAKE ANY OTHER CALIBERS AT THIS TIME.
UPPER, LOWERS WILL NOT BE SOLD SEPARATELY.
FUTURE PROJECTS ARE IN THE FUTURE AND WILL GO THROUGH WOLVERINE SUPPLIES. PLEASE CONTACT THEM FOR MORE INFO.
WE ARE VERY BUSY ON MAKE SURE THAT WE MAKE BEST RIFLE (OUT-OF-THE-BOX) ON TIME FOR YOU AND WE WILL NOT MAKE ANY CUSTOM RIFLES AT THIS TIME.
This Canadian Firearms Safety Course & Canadian Restricted Firearms Safety Course runs over two days from 9:30 am to 5 pm. This is the course required for your Canadian Firearms Possession and Acquisition Licence (PAL).
Canadian Firearms Safety Course Non-Restricted Only - CFSC - Canadian Firearms Safety Course. This Canadian Firearms Safety Course runs over 1 day from 9:30 am to 5 pm.
Canadian Restricted Firearms Safety Course – Restricted Only This Canadian Restricted Firearms Safety Course runs over 1 day from 9:30 am to 5 pm. Testing is completed on the day of instruction.
Combined - Canadian Firearms Safety Course - Non-Restricted Only & CORE Hunter Education Course This is a 2 Day combined course. The Non-restricted Canadian Firearms Safety Courses is completed on the first day.
For individuals who have completed a BC Firearm Academy Canadian Firearms Safety Course Only. The RCMP firearms program no longer allows individuals to challenge the firearms safety course.
This course is designed for those working in the bush or the outdoor enthusiast that spends time in bear country. For individuals who have completed a BC Firearm Academy Canadian Firearms Safety Course Only. The RCMP firearms program no longer allows individuals to challenge the firearms safety course.
Free resources and study materials to help you prepare for your Canadian Firearms Safety Course. No need to print the manual or bring the manual to your course with BC Firearm Academy. No need to print the manual or bring the manual to your course with BC Firearm Academy.
This course is designed to prepare you for the CORE Hunter Education Course examination and as a companion guide to the in-person course. Register for the exam challenge or the online course BC Firearms Academy.
A free online study guide to help you stay safe in the bear country of BC. This online guide will help you work, hunt, hike, and camp safely in the backcountry of BC.